Skip to main content
Provide the Appliance Model, Symptoms, Service Address, and Access Details. Appointment Requirements Are Confirmed Before Scheduling. Refrigeration Service Planned for the Diagnosed Scope Genuine OEM Parts 180-Day Repair Warranty

Error Codes

Thermador E and F Code Guide

Thermador ovens and dishwashers do display coded faults. Here is what the common E and F codes point to, which you can clear yourself, and which need a technician.

Short answer: Thermador uses letter-number fault codes. Oven F codes generally point to control or sensor faults, while dishwasher E codes, on the shared Bosch platform, point to drain, leak, or heating issues. A power reset clears a one-time glitch; a code that returns means a component needs service. Exact codes vary by model.

How to Read a Thermador Code

When a Thermador oven or dishwasher detects a fault, it shows a code and often pauses the cycle. The letter tells you the family, the number narrows the component. Because Thermador spans several control generations, the exact meaning of a given code varies with model and year, so treat any chart as a starting point and confirm against your model. The value of the code is that it points a technician straight at the right subsystem.

Oven Codes

Oven faults commonly cover the control board, the keypad, and the temperature sensor. An F1 or similar control or stuck-key fault sometimes clears with a few minutes of removed power; if it comes back, the keypad or board is the cause. Sensor-related codes mean the oven cannot trust its temperature reading and will not heat correctly until the sensor or its wiring is corrected. These are defined oven repairs.

Dishwasher Codes

Thermador dishwashers share the Bosch platform, so their E codes behave similarly. Drain codes point to a clogged filter, a kinked or blocked drain hose, or a failing drain pump. A leak or water-in-base code trips the base float and shuts the unit down to protect the floor. Cleaning the filter and clearing the drain path resolves many drain codes; a pump or leak fault needs parts.

Common Codes at a Glance

Code FamilyTypical MeaningResponse
Oven F1 / controlControl or stuck-key faultReset power; if it returns, service keypad/board
Oven sensor codeTemperature sensor open/shortReplace sensor or repair wiring
Dishwasher drain (E)Filter, hose, or drain pumpClean filter and hose; replace pump if needed
Dishwasher leak (E)Base float tripped by waterFind and stop the leak; reset base
Heating faultElement or flow heaterDiagnose heating circuit
Write the exact code down. The full code and your model number let us confirm the fault against the correct generation and bring the right part on the diagnostic visit.

Code Keeps Coming Back?

Book a brand-focused diagnosis for your Thermador. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.

Frequently Asked Questions

What Does an F1 Code Mean on a Thermador Oven?
On many Thermador ovens F1 indicates a control or stuck-key fault. Try clearing power for a few minutes. If it returns, the keypad or control board usually needs service rather than another reset.
My Thermador Dishwasher Shows an E Code and Will Not Drain. What Is It?
Drain-related E codes on Thermador dishwashers, which share the Bosch platform, point to a clogged filter, blocked drain hose, or drain pump. Clean the filter and check the drain path first; a failed pump needs replacement.
Are Thermador Error Codes the Same Across All Models?
No. The exact code set varies by model and year, and newer units use different letter-number formats than older ones. Use the code as a starting point and confirm against the model, which is what a technician does.

Related Reading

Thermador Oven Not Heating

No-heat causes and fixes.

Thermador Maintenance Guide

Keep faults from starting.

Thermador Repair

Models and problems we service.

Book a Repair in the Vail Area

Detailed model and symptom intake, genuine OEM parts, and written warranty terms across Vail and the Colorado high country.

Local Repair Notes for Vail

If you are in one of the assigned communities—Vail, Avon, Beaver Creek, Arrowhead—and notice an appliance not working, not cooling, not closing, leaking, or displaying an error, record the model, visible error code, and recent symptoms before requesting service. ZIP codes commonly served include 81657, 81620, 81632, 80424, 80435, 81631.

Call TodayRequest Service